Commercial & Industrial Epoxy Floor Coatings in Mansfield TX - floors that stay bonded
Peeling coating, oil stains or a worn shop floor? We prep the slab right and pick a coating that fits how long you can close.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What goes into a commercial epoxy floor coating in Mansfield?
A commercial or industrial epoxy floor coating is a hard resin layer we bond to your prepared concrete in Mansfield, so a shop, warehouse or kitchen floor stands up to traffic, spills and daily cleaning, and most of the work happens before the coating ever goes down.
You're probably here because the floor in your shop, warehouse or kitchen is peeling, stained or wearing through where carts and forklifts run, and you can't shut the doors for long to fix it. The price mostly turns on the square footage, how much the slab needs before it's ready, like an old coating to strip, oil to pull out or cracks to fill, and which coating system fits the way you use the floor. The schedule turns on how long you can close and how warm the building stays while the coating cures, and the written estimate I give you after seeing the floor spells out the prep and the product for your job.
How can you tell a business floor needs a new coating?
Coating peeling or lifting
You see patches flaking up, often near doorways or where the floor gets washed most. That usually means the coating lost its grip on the concrete, and if you wait, carts catch the loose edges and tear it wider, so more of the floor has to come off before we can recoat.
Oil soaked into concrete
Dark stains under machines or in a service bay won't scrub out no matter what your staff tries. Bare concrete drinks oil like a sponge, and the deeper it goes, the more cleaning the slab needs before any coating will stick to it.
Dust and worn traffic lanes
White powder settles on shelves, or a path shows through the old coat where forklifts turn. That's the surface breaking down, and every month it keeps wearing into the concrete itself, which adds repair work to the job later.
How we handle commercial & industrial epoxy floor coatings
It starts with a question, because for a business the hard part is often the shutdown, so I ask early how long you can be closed and choose the coating around that answer. Then we check the slab for moisture, grind it down to clean, open concrete, fill the cracks and degrease the oily spots, since a coating only holds as well as the surface under it, the same way a sauce is only as good as the stock. After that we lay down the coats, and the whole way through we plan with you where your staff can work while we're on the floor.
Plenty of business owners want the same kind of floor at home, and our garage floor coatings use the same careful prep on a smaller slab. When your closing window is tight, our polyaspartic floor coatings are usually where we start, because they cure faster than a standard epoxy.
Full epoxy system for longer closures
This suits warehouses, shops and back rooms that can stay closed while a standard epoxy cures. It builds a thick, hard layer that holds tight to the concrete and handles heavy carts and spills well.
Fast-cure system for short closures
This suits storefronts, showrooms and kitchens that lose money every hour the doors are shut. The faster-curing coat usually costs more in material, but it gets your floor back in use sooner.
Get a free estimate for your commercial floor coating
Send the form and we reply within one business day to set a time. I come out to look at the floor myself, and the estimate is free, done on site and comes with no obligation.
(817) 405-3758- Based in
- Mansfield, TX 76063
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call us about a business floor?
Here's how a job runs from your first call to the final walk-through, so you know who you'll talk to and what you'll have in hand.
Call and show me the floor
You call or send a message, and I come out to look at the floor and ask how you use the space. I check the slab for moisture, cracks and old coatings, because those three things decide the prep.
Get your written estimate
You get a written estimate that explains how we'll prep your floor and which product fits, so you can see where the money goes before you say yes. Then we pick a date that works around your business.
Prep, finish and walk-through
Our crew does the prep and the finish with me running the job. Before we pack up, I walk the finished floor with you.
Why Mansfield businesses call Bedrock Mansfield Concrete Coatings
The owner sees every floor
I come out to look at the floor myself, and our own crew does the work with me running the job. The person who sizes up your slab is the same one watching the prep, so nothing gets lost between the estimate and the work.
Based in Mansfield since 2023
We've been in business here since 2023, after I learned the trade under a coatings installer and, before that, spent years in restaurant kitchens. Kitchen work taught me the prep decides how the plate turns out, and I'd rather tell you a slab isn't ready than rush it.
Fully licensed and insured
Bedrock Mansfield Concrete Coatings is fully licensed and insured. On a commercial job that's often one of the first things a landlord or property manager asks about, and we're happy to go over it at the estimate.
On a business floor, the coating has to match both your slab and your shutdown, so send us a message or call (817) 405-3758 and tell me how long you can close.
Commercial floor coatings and slab prep in Mansfield
The City of Mansfield requires a permit for any construction, alteration or repair of a building or building system, and its Building Safety Department takes questions at 817-276-4220 or permits@mansfieldtexas.gov. I won't guess whether your floor job counts, so when we're not sure, we ask the city's building office before we start, and if a permit is needed we take care of it. We're based in Mansfield and work across the cities around it, and we ask the local building office the same way on jobs in Burleson and Midlothian.
One DFW coating contractor describes the metroplex as sitting on expansive clay, where slabs shift as the ground swells and dries, so hairline cracks are routine, and triple-digit summers bake anything left exposed. That fits what we see on slabs around here, so we fill cracks and check moisture before any coating goes down, since a crack or damp spot under a fresh coat usually shows up later as a lift.
Questions about commercial epoxy floors in Mansfield
What floor coating is best for a business that can't close for long?
A polyaspartic coating is usually the pick, because one maker says it pairs fast curing with color that holds up in sunlight, which makes it a common choice for facilities that can't afford a long shutdown. The same maker says polyurea also cures fast but yellows in the sun, so it's a weaker fit near open bay doors or big windows. Bring your closing window to the estimate and we'll start there.
What causes epoxy floor coatings to peel on commercial concrete?
Too much moisture coming up through the slab is the main cause, and one maker names high moisture vapor emission as the leading reason resinous floors fail even on well-prepared concrete. Moisture vapor is water rising through the slab, so we check for it before we choose a product. Prep is the other half, and one system data sheet says the weak top layer of the concrete, curing compounds and hardeners all have to come off, recommending shot blasting or planetary grinding to do it.
How long does a commercial epoxy floor stay closed after coating?
The closed time is set mostly by how warm the building is while the coating cures. One floor epoxy data sheet says every 18°F rise or fall can roughly halve or double the dry time, so a cold warehouse in January stays off-limits much longer than the same floor in a warm month. If you can keep the heat on during the work, the floor usually opens sooner.
Does a commercial floor project in Mansfield need an asbestos survey?
If the floor work is part of a remodel or renovation, plan on one, because the city's commercial permit guide says all remodel, renovation and demolition work shall conduct an asbestos survey. The same guide says projects with a construction value over $50,000 have to give a TDLR registration number when the permit application goes in. If you're unsure where your job lands, the city's building office mentioned above is the place to ask.
How much does commercial epoxy flooring cost in Mansfield?
Your price comes from the size of the floor, the prep your slab needs and the coating system that fits your shutdown, and prep is usually the biggest swing. Stripping an old coating, filling cracks or pulling oil out of the slab all add time, and one data sheet calls for an enzymatic degreaser, sometimes in more than one application, on floors soaked with oil or animal fats. A faster-curing system can cost more in material but less in lost business days, and for most storefronts that's the trade I'd make.
What is the best floor coating for a commercial kitchen?
Urethane cement is often a better fit for a kitchen than plain epoxy, because one maker calls it highly chemical resistant, ideal for food and beverage use and tolerant of high moisture vapor. The catch is that the same maker says it discolors over time, so you give up a lasting color for a floor that handles chemicals and a damp slab. For a busy kitchen I'd take that trade most of the time.
Related coating services for your floors
If your business has a service bay or your own home garage needs the same tough floor, this is our coating made for cars, tires and weekend projects.
When you can only close for a short stretch, this fast-curing coating is often how we get a working floor back to you sooner.
Service areas for our commercial floor coatings
Bedrock Mansfield Concrete Coatings is based in Mansfield, TX, and works across the cities around it. This site has pages for 12 cities, including Kennedale and Cedar Hill, and we work in plenty of others nearby too.
Mansfield, TX
Book an estimate for your shop floor
Send the square footage, what the floor is used for, any oil or chemicals on it and how long you can close, and I'll show up ready with the right questions and tests for your slab.