Garage Floor Coatings in Mansfield TX - a floor that holds up to hot tires and oil
Peeling paint, oil stains or dusty concrete in your garage? We prep the slab right and coat it so it stays put.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What goes into coating a garage floor in Mansfield?
A garage floor coating in Mansfield, TX is a layer of epoxy or polyaspartic bonded to your concrete slab. It gives you a floor that wipes clean of oil and takes a parked car every day once the coating's cure time has passed.
Most people call us when the garage floor is stained, dusty or peeling from a kit that didn't last, and at Bedrock Mansfield Concrete Coatings we start by figuring out why. The price mostly turns on the size of the garage, how much oil and old coating has to come out, any cracks to fill and which product you pick, while the schedule turns on that same prep plus how long your coating needs to cure before the car goes back in. A failed coat sometimes needs stripping and removal first, the way you'd scrub a burnt pan before cooking in it again. Your written estimate lays out both the price and the schedule for your garage.
How do you know your garage floor needs a coating?
Coating peeling under tires
If patches of an old coating lift where you park, and sometimes stick to the tires, the coat usually never bonded because the slab wasn't prepped well or held moisture. Every week you drive on it, more edges catch and peel, and that's more to strip off before a new coat can go down.
Oil spots soaked in
Dark spots under the engine that soap won't touch mean oil has worked down into the bare concrete. A coating won't hold over oil, and the longer it sits, the deeper it goes and the more cleaning it takes before we can coat.
Dusty, pitted bare concrete
If you sweep up gritty dust every week or see small pits and a rough, worn top, the surface of the slab is wearing away. Left alone, that dust keeps tracking into the house, and deeper pits mean more patching before the floor can be coated.
How we put down a garage floor coating
Garages deal with hot tires, oil drips and a car you need back, so the first thing I do is ask how you use yours and talk through epoxy and polyaspartic with that in mind. On the day, our crew clears the space, cleans the oil out of the concrete and checks the slab again before anything else, because a coating only holds as well as what's under it. We grind the surface so the coat has something to grip, fill cracks and chips, then put down the base coat, any color flake you've picked and the topcoat. After that the floor sits until its cure time has passed, and you get your garage back.
The coating you pick shapes the rest of the job. Our polyaspartic floor coatings page covers that product on its own, and if you want the garage to double as a showpiece, metallic epoxy flooring puts a swirled, glossy look over the same careful prep.
Flake finish
Colored chips broadcast into the wet base coat hide dust, tire marks and small flaws in the slab, and they add a little texture underfoot. It suits most family garages that see cars, bikes and muddy shoes.
Solid color finish
One even color under a clear topcoat gives a clean, bright floor where a dropped screw is easy to spot. It suits workshops and tidy garages, though it shows dust and tire marks sooner than flake does.
Get a written estimate for your garage floor
We reply within one business day to set a time for me to come look at your garage. The estimate is free, done on site and comes with no obligation.
(817) 405-3758- Based in
- Mansfield, TX 76063
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call us about your garage floor?
Here's how a garage job runs from your first call to the last walk-through, so you know who you'll be dealing with at each step.
Call or send us a message
Call (817) 405-3758 or send the form, and we'll set a time that suits you for me to come see the garage.
I look at your slab
I ask how you use the garage, then check the slab for moisture, cracks and old coatings. That's when I find out what the prep really needs, and I'd rather ask too many questions than guess.
Read your written estimate
You get a written estimate that explains how we'll prep the floor and which product fits, so you can see what each part of the price pays for. Then we pick a date that works for you.
We prep, coat and walk it
Our crew does the prep and the finish with me running the job. Before we pack up, I walk the done floor with you so you can ask about anything you see.
Why Mansfield homeowners call us for garage floors
I check your slab myself
We're based in Mansfield, and I come out to look at the floor myself, then our own crew does the work with me running the job. If the slab isn't ready to coat, I'd rather tell you than rush it and watch it peel.
In business since 2023
We've been coating floors for three years, and before that I learned the trade under a coatings installer after years cooking in restaurant kitchens. A kitchen teaches you that the prep decides how the plate turns out, and I run every floor the same way.
Fully licensed and insured, every job
We're fully licensed and insured. Ask any crew you're thinking of letting into your garage to say the same before they start.
On a garage floor, the cleaning and grinding you'll never see decides whether the color stays put. Tell us about your garage and I'll come out to have a look.
Garage floors, concrete prep and city permits in Mansfield
The City of Mansfield requires a permit for any construction, alteration or repair of a structure, and whether coating a garage floor counts isn't something I'd guess at. When we're not sure, we ask the city's Building Safety Department before we start, and if a permit is needed we take care of it. You can check with that office yourself at 817-276-4220 or permits@mansfieldtexas.gov.
Most garages we see around here bake in summer, collect oil drips under the car and often carry a store-bought kit that's started to flake, so we plan the prep and the product around all three. We see the same floors on jobs in Burleson and Midlothian.
Questions about garage floor coatings in Mansfield
Should I pick epoxy or polyaspartic for a garage floor in Mansfield?
For a garage that gets hot, I'd usually lean polyaspartic. One DFW coating site says epoxy can soften in extreme garage heat, while polyaspartic resists hot-tire pickup, won't yellow in sunlight and handles repeated heating and cooling better. Epoxy still has its place, so I'll talk through how you use the garage before we settle on one.
How long does a garage floor coating take before I can park on it?
Polyaspartic is often ready for cars in 24 hours, and professional epoxy takes 3 to 5 days counting cure time, according to one DFW coating site. Plan where the cars will go for that stretch, and if you can't spare the garage for most of a week, that's a good reason to choose polyaspartic.
How much does a garage floor coating cost in Mansfield, TX?
Installed epoxy or polyaspartic garage floor coating usually runs about $3 to $12 per square foot across the US, and that's the market's range, not our price. A clean slab and a simple finish sit toward the low end, while heavy oil, old coatings to remove and a premium product push it up. Your written estimate gives the figure for your own garage.
Why does moisture in a concrete slab matter for a garage coating?
A slab can feel bone dry and still hold enough moisture inside to lift a coating within months. When that moisture gets trapped under the coat, it pushes the film up into blisters that typically show up days to weeks after the job. That's why I check the slab for moisture instead of trusting how it feels.
Is acid etching enough to prep a garage floor for epoxy?
Usually not, because one coating maker's guide reports that most professionals consider acid etching inadequate prep for resin floors. Part of the reason is that acid does nothing about oil or grease, and every garage has some. Ask each installer how they'll prepare your slab, and you've already read how we do it in the section on how we coat.
What causes bubbles in an epoxy garage floor?
Bubbles usually come from outgassing, when air and moisture vapor rise out of the slab as it warms and get trapped in the epoxy. Fixing it means sanding the coating down and putting it on again, so it's worth avoiding. Heat makes epoxy cure faster and it may turn tacky above 90 degrees F, which is why one resin maker's guide suggests starting early or in the evening on hot days.
Garage floor options worth a closer look
If your garage bakes all summer, read how we handle a polyaspartic coat, from the prep under it to the finish you park on.
Metallic epoxy gives a glossy, swirled look like poured stone, which suits a showroom garage or home gym more than a working bay with oil drips.
Garage floor coating service areas near Mansfield
Bedrock Mansfield Concrete Coatings is based in Mansfield, Texas, and we coat garage floors across the cities around it. The 12 cities listed here each have their own page, including Kennedale and Waxahachie, and we work plenty of other nearby cities too.
Mansfield, TX
Book a look at your garage floor
Tell us roughly how big the garage is and what's on the floor now, whether bare concrete, oil spots or an old coating, so I know what to check when I come out.