Flooring Contractor in Burleson, TX - Garage, Pool Deck and Shop Floors
Bedrock Mansfield Concrete Coatings is a flooring contractor serving Burleson, TX. We grind, repair and coat concrete for garages, basements, pool decks and business floors, from epoxy and polyaspartic to polished and stained concrete.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Burleson homes, garages and shops we work on
Burleson sits just west of our base in Mansfield, and the floors we see there run from older homes near the older center of the city to newer neighborhoods full of two- and three-car garages. Plenty of those garages have turned into workshops, home gyms or overflow storage, and the city's shops, restaurants and small warehouses keep the commercial side busy too. It's the same mix we find down the road in Alvarado, so the work carries over.
The age of the house usually tells me what's waiting on the slab. Older homes tend to carry paint, sealer or carpet glue from past owners, so prep takes more grinding, and newer slabs can still have a curing compound on top that a coating won't stick to until it's ground off.
Floor services we offer in Burleson
When a Burleson garage or utility room has bare gray concrete that stains and dusts, epoxy gives you a sealed, wipeable floor once the slab is ground clean.
For shops, warehouses and restaurant kitchens around Burleson, we put down thicker epoxy systems that stand up to carts, forklifts and daily mopping, scheduled around your hours.
Lots of Burleson garages double as workshops and home gyms, so we build a flake-coated floor that holds up to oil drips, dropped tools and tire marks.
If you need the garage back quickly, polyaspartic cures faster than standard epoxy and holds its color in sunlight, which matters when the door stays open.
Homeowners here finishing a game room, home bar or showroom-style garage ask for metallic epoxy because the swirled, glossy look reads more like stone than concrete.
Restaurant and food-prep kitchens around Burleson take hot water washdowns and grease every night, and urethane cement is built for that kind of heat and moisture.
When a Burleson home or storefront already has a sound slab, polishing grinds and refines that concrete into a low-upkeep shine with no coating to wear through.
Stain soaks into the concrete instead of sitting on top, so it suits patios and slabs found under old carpet when you want warm color without a film.
For a busy lobby or entry in a Burleson business, terrazzo sets marble or glass chips in resin for a floor that wears slowly and cleans easily.
When you've got a basement or below-grade room, we test the slab for moisture before choosing a floor, because damp concrete is what pushes coatings loose.
Grinding is the first step on our coating jobs, taking off sealer, curing compound and surface glaze so the new floor bonds to bare, open concrete.
A clear sealer keeps oil, water and fertilizer stains out of patios, walkways and garage floors here, and it's the lighter-touch choice when the concrete still looks good.
When a Burleson patio or shop floor is pitted or patched all over, an overlay puts a fresh surface on top without tearing the slab out.
Older slabs and remodel additions often have dips and ridges, and a self-leveling pour flattens the floor before tile, vinyl plank or a coating goes down.
Backyard pool decks around Burleson take bare feet, chlorine and constant splash, so we resurface or coat them with a textured finish that gives wet feet some grip.
Before a new floor goes down, old epoxy, paint, tile mastic or carpet glue has to come off, and we grind or strip it back to clean concrete.
Get a free floor estimate for your Burleson home or business
We reply within one business day to set a time, then I come out myself to look at the floor and test the slab. The estimate is free, done on site and comes with no obligation.
(817) 405-3758- Based in
- Mansfield, TX 76063
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
Burleson permits, contractor checks and what moves the price
The city's Building Permits & Inspections office issues building permits in Burleson, and you can reach it at 817-426-9632. When I'm not sure a floor job needs one, we ask that office before we start and take care of the permit if it does, which can hold the start date until we hear back. The department also lists a Contractor Registration form for contractors working in the city, which is something you can ask any contractor about. We're fully licensed and insured.
The price on a Burleson floor mostly comes down to its size and what's already on the slab, because old paint, cracks, moisture or a glued-down floor all add prep before any coating goes on. The finish matters too, since a solid-color epoxy takes less material and labor than a metallic floor or a full flake broadcast. Scheduling works the same here as it does up the road in Kennedale, turning on the prep, the product's cure and how soon you need the space back, and for shops and kitchens, on when you can close. Your written estimate gives you your number and lays out the prep and product behind it.
Why Burleson garage and pool deck floors wear out
Garages are a big part of what we see in Burleson, especially now that so many double as workshops and home gyms. Bare concrete dusts, soaks up oil and road grime, and the paint-on kits sold for it tend to lift where hot tires sit. Years in restaurant kitchens taught me the prep decides how the plate turns out, so we grind the slab, fix cracks and check for moisture before any coating goes down, and I'd rather tell you a slab isn't ready than rush it.
Pool decks and patios are the other common call. Older broom finishes wear smooth and stain, and a glossy sealer can make a wet deck slicker, so we resurface or coat with a textured finish instead.
How a floor job runs when you call us in Burleson
From the first call to the final walk-through, here's what a floor job in Burleson looks like on your side, and where I'll need a few answers from you.
Call or send us a message
Call (817) 405-3758 or send the form with a line or two about the floor, and we'll set a time for me to come out. You don't need to know what product you want yet.
I look at the slab myself
I check the floor for moisture, cracks and old coatings and ask how you use the space, a bit like checking the pantry before planning the menu. It helps if you're home for this, because your answers shape which system fits.
Get a written estimate and date
You get a written estimate that explains how we'll prep the floor and which product fits, so you can see what you're paying for before anything starts. Once any permit question is settled, we pick a start date that works for you.
Our crew preps and finishes
Our crew grinds, repairs and coats the floor with me running the job, then I walk the finished floor with you before we pack up. Satisfaction guaranteed on every job.
Questions about hiring a flooring contractor in Burleson
Do I need a permit to coat my garage floor in Burleson?
Burleson's permit lists don't name floor coatings either way. The city calls painting, carpeting, wallpaper, cabinets and trim cosmetic work that needs no permit, while remodels, renovations and structural repairs generally do need one. When a job falls between those, we check with the city's permit office before we start.
Does resurfacing a pool deck in Burleson need a permit?
The city lists pools and spas, patio covers and decks as work that needs a permit, but its lists don't spell out recoating the concrete around a pool that's already there. We get the city's answer before we start, and if a permit is needed, we take care of it.
Which building codes does Burleson use right now?
Burleson enforces the 2021 International codes, covering building, residential, existing buildings, energy, pools and spas, plumbing, mechanical and fuel gas, and electrical work follows the 2020 National Electric Code. The city has proposed moving to the 2024 codes, set for enforcement on Jan. 1, 2027 if they're adopted. You can read the 2021 codes free online at ICCSAFE.ORG.
How much does an epoxy garage floor cost in Burleson?
Your price depends on three things: how big the floor is, how much prep the slab needs and which system you choose. Grinding off old paint, filling cracks or dealing with moisture adds the most, and a metallic or full-flake finish costs more than a solid color. I'll give you a written estimate after I've seen the floor.
What causes epoxy on a garage floor to peel?
Peeling usually starts with prep, because a coating rolled over dirty, sealed or damp concrete has nothing solid to grab. The store-bought kits put down over a washed slab are the ones we see lifting under hot tires. That's why we grind the slab open and test it for moisture before anything goes down.
How do I know if my concrete slab is ready for a coating?
You usually can't tell by looking, which is why I test it on the estimate visit. I check for moisture coming up through the slab, old sealers that make water bead on top, and cracks or soft spots that need repair first. If it isn't ready, I'll tell you what it takes rather than coat it and hope.
Mansfield, TX
Get your Burleson floor looked at
Call (817) 405-3758 any day of the week, until 10 PM on weekdays and 9 PM on weekends, or send the form and we'll set up a time to see your floor.