Self-Leveling Concrete & Overlays in Mansfield TX - A Flat Floor Ready to Finish
Uneven concrete makes new flooring rock and crack. We pour a level surface over your sound slab so the finish goes down flat.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Can you level my concrete floor instead of tearing it out?
Self-leveling concrete and overlays in Mansfield give your existing slab a new, flat surface without breaking it out, as long as the concrete underneath is sound. We prep the old slab, pour a leveling layer over it and leave you a floor ready for tile, plank or a coating.
Most people call us because a floor dips, an old patch shows through or a flooring installer told them the slab isn't flat enough. Before anything else, I'm checking whether your slab is a good base, because a leveler is a new top on old concrete, and if the slab is settling or failing underneath it may need repair or replacement first, the same way a nice glaze won't save an overcooked roast. When the slab is sound, the price mostly follows the square footage, how far the floor is out of level and how much grinding and surface prep it needs before it can take a pour, and the schedule turns on that prep plus the cure time afterward. Your written estimate spells out the prep and the product I'd use, so you know what's driving the number.
How do you know your floor needs leveling?
Floor dips under your feet
You feel a low spot walking across the room, or a table rocks in one corner. It usually means the slab was poured or finished uneven, and any new flooring laid over it will follow that dip and wear out there first.
Installer won't lay the floor
A tile or plank installer checked the slab and told you it's out of flat. Flooring over a floor like that tends to crack, come loose or sound hollow, so the leveling has to happen before the new floor goes down.
Cracks that keep getting wider
A crack you've patched or marked opens up again. That usually means the slab is still moving, and pouring over it before we know why tends to put a fresh crack right back on top.
How we do self-leveling concrete and overlays
I start with the cracks, because I want to know whether they're still moving before we pour, since a moving crack can show up again in the new floor. Next our crew grinds the slab down to clean, open concrete so the leveler has something to grab, repairs what needs it and primes the surface. We mix and pour the leveler and spread it so it settles to its own level, then we keep the room closed up while it cures. Self-leveler is an indoor job for us, so this is work for the floors inside your house.
If there's old tile, glue or a worn coating on the slab, we take it up first with concrete floor stripping and removal, because a pour only bonds as well as what's under it. Since our self-leveler stays indoors, the concrete around your pool gets its own plan through our pool deck coatings and resurfacing work.
Leveling under new flooring
This suits you if tile, vinyl plank or carpet is going down and your installer needs a flat base. We pour the leveler as the layer underneath, and your finish floor goes right on top of it.
Leveled base for a coating
This suits a basement or other inside floor getting a coating, because a thin coating shows every dip and ridge under it. We level first, then talk through which coating fits over the leveler you've got.
Get a written plan for leveling your floor
Send the form and we'll reply within one business day to set a time for me to see the floor. The on-site estimate is free and comes with no obligation.
(817) 405-3758- Based in
- Mansfield, TX 76063
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call us about leveling a floor in Mansfield?
Here's how a leveling job runs from your first call to the last walk-through, so you know who you'll be talking to at each step.
Call or send a message
You call (817) 405-3758 or use the form, and I set up a time to come look at the floor. It helps if you know the room's rough square footage and where the low spots are.
I look at your floor
I ask how you use the room and check the slab for cracks and old coatings, then you get a written estimate that explains how we'll prep the floor and which product fits. You see what's behind the price before you agree to anything, and we pick a date that works for you.
Our crew preps and pours
Our crew does the prep and the pour with me running the job. When it's done, I walk the floor with you before we pack up.
Why Mansfield homeowners call Bedrock Mansfield Concrete Coatings for floor leveling
The owner looks at your floor
I come out to see the floor myself, and our own crew does the work with me running the job. The person who read your slab is the same one making sure the pour matches what we talked about.
Based in Mansfield since 2023
We started our shop here in 2023, after I learned the trade under a coatings installer and spent years in restaurant kitchens before that. Kitchens taught me the prep decides how the plate turns out, and floors work the same way.
Licensed and insured, ask anytime
We're fully licensed and insured. Ask about it when I'm out, because any crew grinding and pouring inside your house should be able to show you.
A floor we'll put our name on
Satisfaction guaranteed on every job. I'd rather tell you a slab isn't ready than rush a pour that looks great the day we leave and gives out later.
What matters most on a leveling job is what's under the pour, so let's start by looking at your slab. Ask for an estimate or call (817) 405-3758.
Floor leveling and slab prep in Mansfield
Mansfield requires a permit for any construction, alteration or repair of a structure, building or building system, and that rule doesn't say one way or the other whether leveling a floor counts. When we're not sure a job needs a permit, we ask the city's Building Safety Department before we start, and if one is needed we take care of it. You can also call them with your own questions at 817-276-4220.
A lot of slab cracks around here start in the ground. Much of Mansfield sits in Tarrant County, where foundations crack mostly because the clay underneath swells and shrinks as its water content changes, which is the reason for the crack check I talked about above. We're based in Mansfield and work across the cities around it, and we run into the same clay on jobs in Kennedale and Forest Hill.
Questions about self-leveling concrete in Mansfield
How much does self-leveling concrete cost per square foot?
Across the US, leveling a concrete floor with self-leveling compound usually runs about $4 to $7 per square foot installed, and that's the going rate, not a quote from us. Where your floor lands depends on how far it's out of level and how much prep the slab needs, and your written estimate lays that out once I've seen it.
Can an overlay fix a cracked or sinking slab in Mansfield?
No, an overlay won't hide serious structural problems, and with significant settlement or major structural failure, repair or replacement may make more sense. One maker also warns that cracks or joints that still move can carry up through a self-leveler and crack the floor on top, so tell me about any cracks that shift while the plan is still open.
Can self-leveler go on a patio?
Not the self-leveler we pour, because it's made for floors inside the house. One maker's installation guide says its self-leveling underlayment is for interior floors only, so we match the product to the space and a patio isn't a place we'd use it.
Do I need a permit to level a floor in Mansfield?
It may, and we find out before the pour instead of guessing. The city's rule covers any alteration or repair of a building without naming floor leveling, so as I mentioned above, we check with the city's building office first and handle the permit if one's needed.
How do I get old flooring glue off before self-leveling?
Go carefully, because grinding or scraping off old adhesive can be hazardous if the glue contains asbestos. One maker points owners to the adhesive's maker and the proper government agencies about removing cutback adhesives, so if your slab has black glue left from old tile, I'll ask about it on the estimate before anyone touches it.
How long does the room need to stay closed after a self-leveling pour?
One maker's guide keeps the concrete and the room between 50°F and 95°F before the pour and for at least 72 hours after it. The same guide calls for doors and windows shut, the HVAC off and the floor out of direct sun until it cures, though it allows some indirect air movement in large rooms to clear the humidity, so plan how you use that room around that window.
Related concrete work that often goes with leveling
Old tile, glue, paint or a failing coating has to come off before a pour will bond, and this is how we get a slab back to bare concrete.
Concrete around your pool takes sun, water and bare feet, and since our self-leveler stays indoors, that slab gets its own coating or resurfacing plan.
Service areas for self-leveling concrete work
Bedrock Mansfield Concrete Coatings is based in Mansfield, Texas, and works across the cities around it, including Burleson and Midlothian. The 12 cities listed here have their own pages on this site, and plenty of others nearby call us too.
Mansfield, TX
Get your uneven floor looked at
Have the room's square footage and a few photos of the cracks or low spots ready, and I can tell you a lot more on that first call.