Flooring Contractor in Richland Hills, TX - Floors That Start With a Ready Slab
Bedrock Mansfield Concrete Coatings puts down epoxy, polyaspartic, polished and stained concrete floors in Richland Hills, TX, on garages, pool decks, shops and commercial kitchens, after grinding and testing the slab so the coating holds.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Richland Hills garages, shops and kitchens we work on
We're a flooring contractor based in Mansfield, TX, and Richland Hills is one of the cities we drive up to for garage floors, patios and pool decks at people's homes. The rest of the calls here come from shops, small businesses and the odd restaurant kitchen that needs a floor it can hose down at night.
Most of the houses we work on around here sit on concrete, so the garage floor and the patio are slabs that were poured years back and have worn in their own way. That's what shapes the job, because I can't pick a product until I know how your particular slab has aged, so the first thing I do is go look at it.
Floors and coatings we put down in Richland Hills
For a garage or workroom tired of dust and stains, a ground slab under a solid epoxy coat gives you a floor that sweeps clean.
Shops and small businesses in Richland Hills get a thicker system built for carts, forklifts and spills, and we plan the work around your open hours.
A lot of calls here start in the garage, with oil spots, hot-tire marks or old paint lifting, and we grind it off before the new coat.
When you want the garage back in use quickly, a polyaspartic topcoat cures fast and holds its color in the sun that comes through an open door.
For a living area, a bar or a showroom on slab, metallic epoxy gives a poured, swirled look, and it shows flaws underneath, so prep matters most.
Restaurant kitchens and food shops get a floor that takes hot washdowns and grease, the kind of floor I stood on for years.
If your slab is sound and you'd rather skip a coating, we grind and polish the concrete itself for a shine that suits shops, offices and living spaces.
When pulling up old carpet or tile leaves bare concrete you actually like, a stain and sealer gives it color without covering the character of the slab.
For a lobby, a storefront or an entry that sees heavy foot traffic, terrazzo sets chips into the floor for a hard surface that's ground smooth.
Below-grade rooms and slab rooms that run damp need a moisture check before anything goes down, and we pick a floor that suits what the test shows.
This is the part you won't see once the floor's done, the grinding that opens up the slab so a coating has something clean to grip.
A driveway, patio or bare garage slab that soaks up every spill can get a sealer, so spills sit on top long enough to wipe up.
When a patio or garage slab is worn, pitted or patched but still solid underneath, a thin overlay gives you a fresh surface without tearing it out.
Uneven floors in add-ons, converted garages or older shop spaces get a pourable layer that settles flat, ready for tile, vinyl or a coating.
A pool deck that's cracked, slick or rough underfoot can be resurfaced with a textured coating that gives bare feet better grip around the water.
Before anything new goes down, we take off old paint, glue, sealer or failing epoxy, so your next floor isn't sitting on someone else's mistake.
Get a free on-site floor estimate in Richland Hills
Send the form and we'll reply within one business day to set a time. I'll come out and look at the floor, and you'll get a written estimate that's free and comes with no obligation.
(817) 405-3758- Based in
- Mansfield, TX 76063
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
Working in Richland Hills: what the city asks of contractors
In Richland Hills, the city's Development Services office issues permits for construction work, and when we're not sure a floor job needs one, we ask the city before we start and take care of it if it does, so that question is settled before your date is set. The city also requires every contractor working inside its limits to register, showing a valid driver's license, their state licenses and proof of commercial liability insurance, which makes it a fair thing to ask anyone you're thinking of hiring. We're fully licensed and insured.
Our crew brings its own grinders, vacuums and mixing gear, and for shops and kitchens we plan the prep and the coats around your open hours. What moves the price is the size of the floor, how much old coating or damage we have to grind out and which finish you pick, and the schedule turns on that same prep, any permit question and how long the product needs before you walk on it. Your written estimate lays out the prep and the product for your floor, the same way it does when we're working in Kennedale or Forest Hill.
Richland Hills slabs and what usually goes wrong
Peeling or flaking garage paint is one of the most common things we see, usually a coat that went down on a slab nobody ground first, so it let go once hot tires and spills worked at it. A coating only holds as well as what's under it, the same way a plate is only as good as its prep, so we grind the old layer off, repair cracks and test for moisture before a new system goes down. If your slab isn't ready, I'll tell you rather than coat it anyway.
Business floors here take a different beating, with carts, washdowns and kitchen grease that wear through bare or painted concrete fast. For those we usually lean toward urethane cement or a thicker epoxy system, picked after I've asked how the room gets used on a busy day.
How a floor job runs when you call us in Richland Hills
From your side, it's a call or a message, one visit from me, a written estimate and then our crew on the date you picked.
Call or send a message
Call (817) 405-3758 or send the form with a few lines about the floor, and we'll set a time for me to come out. A photo of the worst spot helps me know what to look for.
I check the slab myself
I come out, ask how you use the space and check the slab for moisture, cracks and old coatings. You then get a written estimate that spells out the prep and the product, so you can see what the price is built from before you agree to anything.
Our crew preps and finishes
On the date we pick together, our own crew grinds, repairs and cleans the slab before any coating or polish goes on, with me running the job. You don't have to stay home the whole time, but we'll need a way in.
Walk the finished floor together
Before we pack up, I walk the floor with you and go over how to care for it. Satisfaction guaranteed on every job.
Questions about flooring contractors in Richland Hills
Do I need a permit for an epoxy garage floor in Richland Hills?
We confirm that with the city before we start, because its Development Services office issues permits for construction work in Richland Hills and I'd rather ask than guess on your job. If your floor turns out to need one, we take care of it. If you'd like to ask yourself, the office answers permitting questions at 817-616-3770, and the city's permitting procedures page explains how it handles permits.
Does resurfacing a pool deck or patio in Richland Hills need a permit?
That's one we check with the city first, because its permit page lists swimming pools and flat work such as patios and sidewalks. The city's residential remodel checklist also asks for a lot survey on flatwork, so if you have a survey of your lot, set it aside for us.
What happens if a contractor works without a permit in Richland Hills?
The city issues a Stop Work Order for work done without a needed permit, and extra penalty fees come on top of that. That's why we settle the permit question before our crew shows up, instead of finding out halfway through a grind.
How much does it cost to coat a garage floor in Richland Hills?
There's no single price, because it turns on the floor's size, what's already on the slab and the system you choose, so I'd rather give you a written figure after seeing it. Grinding off old paint or failing epoxy, filling cracks and dealing with moisture all add to the job, and a flake or metallic finish usually runs more than a plain solid color. Your estimate breaks out the prep and the product so you can see where the money goes.
How long does it take before I can use my garage again after a floor coating?
It's usually the cure time that keeps you off the floor, not the work, and a polyaspartic topcoat gets you back on it sooner than a full epoxy system. I'll tell you the wait for your product before we book the date, so you can plan where the cars go.
How do I get my Richland Hills garage ready for a new floor coating?
Clear the floor completely, including cars, shelves, bikes and anything stored against the walls, so our crew can grind right to the edges. Tell me what you know about the floor's history, like a past paint job or a sealer, because that changes the prep more than anything you could do with a broom. We handle the grinding, crack repair and cleaning ourselves.
Mansfield, TX
Book your Richland Hills floor estimate today
Call (817) 405-3758 or send the form, because one look at your slab tells us whether it's ready for a coating, needs repair first or would do better polished.