Bedrock Mansfield Concrete CoatingsBedrock Mansfield Concrete Coatings

Flooring Contractor in Mansfield, TX - Floors Built on a Slab That Was Ready

Bedrock Mansfield Concrete Coatings is a flooring contractor based in Mansfield, TX. We grind, repair and coat concrete for garages, pool decks, shops and restaurant kitchens across the city, and I look at each floor myself.

Blue, white, and black flake epoxy floor fills a garage and reflects daylight from the open door.
  • Fully licensed and insured.
  • Free quotes on site.
  • We reply within 1 business day.

Mansfield homes and shops, and the slabs under them

Mansfield is where we're based, so a lot of our work is close to home. We get called to garages in newer subdivisions that have never had more than bare concrete, to backyard pool decks that have started to flake, and to older houses near Historic Downtown with slabs that have been patched and painted more than once. Restaurants and shops call too, because they need a floor they can scrub at closing. We work the same way across the cities around it, down to Midlothian and plenty of places in between.

The age of the house usually tells me what I'll find. An older slab has had years to soak up oil and collect sealer, glue and patches, so grinding it takes more work. A newer one can still carry the curing compound from the day it was poured. Either one will make a coating let go if we don't take that layer off first.

Floor services we do for Mansfield homes and shops

  • A good fit for the bare garage and workshop slabs we see across Mansfield subdivisions, once we've ground the surface so the epoxy has something to grip.

  • Mansfield shops, warehouses and service bays take forklift traffic and spills, so we pick a thicker system for them and plan the work around your business hours.

  • Garages are where many Mansfield calls start, because hot tires, oil drips and dragged tools wear bare concrete down faster than any room in the house.

  • When you need the garage or patio back quickly, polyaspartic cures faster than standard epoxy and holds its color better where sunlight hits it.

  • For a showroom, bar or finished game room in Mansfield, metallic epoxy gives a poured, marbled look. It shows every flaw, so prep matters even more.

  • Restaurant kitchens and food prep rooms in Mansfield get hot washdowns and grease every night, and urethane cement is made for that kind of heat and water.

  • When a slab is sound, polishing brings out the concrete itself. It's a low-upkeep choice for shops, offices and open-plan homes around Mansfield.

  • Stain gives patios, porches and interior slabs in Mansfield homes a warm, varied color. It soaks into the concrete instead of sitting on top like paint.

  • Lobbies, church halls and school entries around Mansfield see heavy foot traffic. For those floors, terrazzo sets stone or glass chips into a ground, polished floor.

  • When a Mansfield house has a basement or a below-grade room, we test for moisture first, because water pushing up from below is what lifts most basement floors.

  • This is the step that decides everything else. We open up the slab so a coating can bite, and we clear the old sealer, glue and paint left by past owners.

  • A clear sealer helps driveways, patios and garage slabs around Mansfield shed water, oil and stains when you want protection without changing the look.

  • When an older Mansfield patio or garage floor has pitted and flaked at the surface, an overlay puts a new top on a slab that's still solid underneath.

  • Uneven slabs in older Mansfield houses and remodels often need flattening before tile, vinyl plank or a coating goes down. A self-leveling pour fills the low spots.

  • Backyard pool decks in Mansfield take chlorine, bare feet and constant splashing, so we fix the cracks and lay a textured surface that grips better when it's wet.

  • We take up the tile, carpet glue, peeling epoxy or paint that Mansfield remodels turn up, so the next floor bonds to clean concrete.

Get a free on-site floor estimate in Mansfield

Send the form and we'll reply within one business day to set a time. I'll come out to look at the floor myself, and the estimate is free with no obligation to go ahead.

(817) 405-3758
Based in
Mansfield, TX 76063
Hours
Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM

Permits, trades and price on Mansfield floor jobs

In Mansfield, the city's Building Safety Department issues permits for construction, alteration and repair of a building or its systems. It also takes calls at 817-276-4220 on whether a job needs one. I won't guess whether a coating or polish on your existing slab counts. When I'm not sure, I ask the city before we start, and if a permit is needed, we take care of it and set the start date after it. The city also requires electrical, mechanical and plumbing contractors to register with it, and on a remodel each subcontractor has to be registered and pull its own permits. If your floor job brings in a plumber for a new drain, that's a fair thing to ask them about. We're fully licensed and insured.

Three things move the price here: the size of the floor, the shape the slab is in and the system you choose. The schedule turns mostly on the slab itself, meaning how much old coating has to come off and whether the moisture test comes back where it should. Your written estimate spells out both for your floor. Because we're based right here, coming back across town for a second moisture check is easy, and so is a look at a crack that showed up after grinding. We do the same work just up the road in Kennedale and over in Burleson.

Why Mansfield garages and slabs need prep first

  1. Older homes and garages that take water are the first thing I watch for in Mansfield. The city's own guidance says several homes here were built before federal floodplain restrictions and will flood in a large enough storm. A slab that's been wet holds moisture, and that moisture pushes up under a coating and lifts it. So I test for moisture before I quote and pick a product that can handle what the slab is doing. If the slab isn't ready, I'd rather tell you than rush it.

  2. Newer houses bring a different problem. Their garages usually come with bare concrete, and hot tires, oil and road grit wear it down and stain it. A coating over a ground slab gives you a floor you can hose off.

How a floor job runs when you call us in Mansfield

Here's what happens from the first call to the final walk-through, so you know who you'll see and what you'll have in hand before we start.

  1. Call or send a message

    Call (817) 405-3758 or send the form, and tell me what the floor is and how you use it. We set a time for me to come out, and it helps if you're home so I can ask questions.

  2. I check the slab myself

    I check the slab for moisture, cracks and old coatings and ask how you use the space, since that decides the product. Then you get a written estimate that spells out the prep and the product, so you see what you're paying for before you decide.

  3. Our crew preps and finishes

    We pick a date that works for you. Our crew grinds, repairs and cleans the slab before any coating goes down, with me running the job, and you don't need to stay home as long as we can get into the space.

  4. We walk the finished floor

    Before we pack up, I walk the floor with you and go over when it's ready for foot traffic and when it's ready for a car. Satisfaction guaranteed on every job.

Flooring contractor questions in Mansfield, TX

Does a kitchen or garage remodel in Mansfield need a city permit?

Yes. If the remodel involves any structural change, electrical work or plumbing work, Mansfield requires a permit, and the city's inspections are included in the permit fee. For a coating or polish on its own, we check with the city first, as described above.

What building codes does the City of Mansfield follow?

Mansfield builds to the 2018 building codes with its own local amendments, and Building Safety is asking for public input on moving to the 2024 codes. The city lists what's in force on its building codes page. The only official copy of the city code is kept at the City Secretary's Office in City Hall.

How much does an epoxy or polished concrete floor cost in Mansfield?

The price comes down to the size of the floor, the shape the slab is in and the system you pick, and your written estimate puts a figure on all three. Grinding off old epoxy or carpet glue, filling cracks and dealing with a damp slab all add work. A clear seal or a simple polish usually costs less than a full flake or metallic system with a tough topcoat.

How do I get a dumpster for tearing out old flooring in Mansfield?

Call Frontier Waste at 817-961-1125. It's the hauler the city has franchised, and the city points you to it for a temporary roll-off on a construction project. A coating job rarely fills one, but a big tile tear-out can, and I'll tell you at the estimate if yours is heading that way.

What causes a garage floor coating to peel?

Most peeling comes from prep. Usually the coating went onto a slab that wasn't ground, was still holding oil or old sealer, or had moisture pushing up from underneath. It's like searing in a pan that never got hot, because nothing grabs. That's why I test and grind every slab before anything goes down.

Do you do flooring work in cities near Mansfield?

Yes. We're based in Mansfield and work across the cities around it, including Midlothian, Burleson and Kennedale, along with plenty of others that don't have their own page here. The process is the same wherever you are, starting with a look at your slab.

Mansfield, TX

Get your Mansfield floor looked at

A slab is easier to fix at the first peel or crack, so an early look can save you from a full strip and redo later.